Search found 214 matches

by moallen
October 6th, 2017, 11:50 am
Forum: Starcraft AR-One Hardside and Hybrids
Topic: Are there step-by-step winterization guides for 16BH?
Replies: 1
Views: 1718

Re: Are there step-by-step winterization guides for 16BH?

Someone on this forum might have put together a detailed winterization checklist for your model, but it really comes down to the minimum things to do and then all the extra things some like to do when storing their trailer over the winter in cold climates. In my mind, the minimum things are getting ...
by moallen
October 4th, 2017, 10:48 am
Forum: Starcraft Launch Hardside and Hybrids
Topic: Low Point Valves (2015 Launch 26bhs)
Replies: 6
Views: 2937

Re: Low Point Valves (2015 Launch 26bhs)

The valves are probably right above those stubs inside the trailer. I have to take the lower panel off my bathroom sink to get to them on my 24rls. You'll want to make sure that end of your trailer is lower. But just to make things complicated, then I have to raise that end to get all the water to d...
by moallen
September 26th, 2017, 10:34 pm
Forum: Camping General Discussion
Topic: Rookie Mistake / Awning
Replies: 8
Views: 5844

Re: Rookie Mistake / Awning

I have a Lippert that is supposed to be self-leveling when it rains. But both arms stay up and then the awning collects a big pool of water which makes it sag in the middle. If I pull one arm down (before it rains) it will work itself back up in an hour or so. Long story short, I attach a bungee cor...
by moallen
September 20th, 2017, 12:44 pm
Forum: Modifications (Mods)
Topic: 24rls ladder
Replies: 6
Views: 3969

Re: 24rls ladder

Thanks for the info. I did call them yesterday and got ahold of someone right away that is going to email me a drawing. He needed my VIN to send the right drawing. Seems some changes were made during the 2016 model run. I'm going to install a ladder to clean the top of the slideout. A puddle of wate...
by moallen
September 19th, 2017, 1:06 pm
Forum: Modifications (Mods)
Topic: 24rls ladder
Replies: 6
Views: 3969

24rls ladder

Has anyone installed a rear roof ladder on their 24rls? If so, I'm wondering whether it has builtin backing to attach it?
by moallen
September 10th, 2017, 8:05 pm
Forum: Starcraft Launch Hardside and Hybrids
Topic: Pulling the trigger
Replies: 3
Views: 1418

Re: Pulling the trigger

Congratulations on your new Starcraft! This works for our small dog. I installed a piece of 1/8" plexiglass in the side channels of the screen door. I cut it a little wider than the opening and bowed it to pop it in. A persistent dog could scratch it up, but ours doesn't like slick things and leaves...
by moallen
September 8th, 2017, 11:41 am
Forum: Starcraft Launch Hardside and Hybrids
Topic: Launch Ultra Lite 24RLS - Loaded Weight?
Replies: 1
Views: 1187

Re: Launch Ultra Lite 24RLS - Loaded Weight?

I weighed my 24rls at a Pilot last year, loaded and on the way to a week long camping trip. It came in a little over 6,100 lbs. There were plenty of other things we would have taken if we could have, but ultra lights just don't have the cargo capacity. Spec sticker says it can carry 940 lbs cargo, w...
by moallen
August 20th, 2017, 11:10 am
Forum: Starcraft Launch Hardside and Hybrids
Topic: Buying New 24RLS: What to check for?
Replies: 2
Views: 1380

Re: Buying New 24RLS: What to check for?

Congratulations! We love our 2016 24rls. One thing to make sure the dealer does is check the factory recall database. Never fun to take the trailer back for a recall that came out before you picked it up. A few other things - Make sure the dealer shows you exactly how the propane tanks switch over o...
by moallen
August 14th, 2017, 11:07 am
Forum: Camping General Discussion
Topic: Short in the running lights
Replies: 2
Views: 2397

Re: Short in the running lights

Geez - pulling the underbelly cover to find a short doesn't sound like much fun. Did you put plastic tubing everywhere the wires went through a truss? I would almost pay to watch one of these being put together, so I would know where the weak points were.
by moallen
August 5th, 2017, 2:11 pm
Forum: Modifications (Mods)
Topic: Progressive industries ems
Replies: 2
Views: 1392

Re: Progressive industries ems

Are you going to permanently wire the ems in? There should be a 4x4 junction box somewhere just inside the back wall where the rubber power cord connects to the house wiring. That's where I've put one before. I'm just using a plugin ems on the trailer I have now. Best to tape that kind to the power ...