Full Motion TV Mount

A place to discuss non-OEM upgrades and improvements
Post Reply
ARONEMAXX17
Posts: 5
Joined: March 18th, 2017, 1:31 am

Re: Full Motion TV Mount

Post by ARONEMAXX17 » April 8th, 2017, 7:09 pm

Well I actually got this done with no problem at all. I simple took the four screws holding the microwave in place and removed it completly. Next I cut a piece of 2x4 and screwed from outside to inside just enough to hold in place until I could secure my mount. I'll have to upload pictures next time I'm in the camper.

User avatar
kuba122
Posts: 307
Joined: November 1st, 2015, 10:17 pm
Location: Dallas Texas
Contact:

Re: Full Motion TV Mount

Post by kuba122 » March 25th, 2017, 8:14 pm

The main thing to be concerned about is finding something fairly substantial to mount it to. Find a Stud and make sure you drive at least two of the mounting screws into it. If you cannot hit a stud, cut a piece of 1/2 to 3/4 plywood or solid pine/oak, etc that can hit a stud at both ends and mount the tv mount to that. Sorry it took so long to get some sort of answer!!
2014 Starcraft AR-One 15RB
2006 Chevrolet Silverado

Image

ARONEMAXX17
Posts: 5
Joined: March 18th, 2017, 1:31 am

Full Motion TV Mount

Post by ARONEMAXX17 » March 18th, 2017, 1:41 am

Hey guys just curious. I recently bought a AR-ONE MAXX 19BHS. and with two small children I needed some way to entertain on rainy days or at night. Where is the best place to mount a small TV.

Thanks

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests