Furrion pre-wired backup camera question

A place to discuss non-OEM upgrades and improvements
Post Reply
User avatar
kuba122
Posts: 307
Joined: November 1st, 2015, 10:17 pm
Location: Dallas Texas
Contact:

Re: Furrion pre-wired backup camera question

Post by kuba122 » May 26th, 2017, 12:09 am

I powered with the running lights. My trailer doesn't have backup lights.
2014 Starcraft AR-One 15RB
2006 Chevrolet Silverado

Image

User avatar
oldenuftoknowbetter
Posts: 48
Joined: March 15th, 2016, 12:43 pm
Location: NC

Re: Furrion pre-wired backup camera question

Post by oldenuftoknowbetter » May 22nd, 2017, 4:12 pm

When pre-wired, the camera is normally tied into the running lights. So, you will need to have your running lights on to operate the camera. If the initial connection doesn't work, check to see if the pre-wire was installed incorrectly. Mine was wired backwards. After I figured that out, no worries. Enjoy your new camera!
2013 Ford F-150 Supercrew 5.0L w/factory tow package
2016 Starcraft Launch UltraLite 26BHS w/ Reese WDH

bb3439
Posts: 2
Joined: May 19th, 2017, 2:48 am

Furrion pre-wired backup camera question

Post by bb3439 » May 19th, 2017, 3:25 am

Our 2017 24RLS came fitted with a Furrion Backup Camera mount that is (I assume) prewired. I bought the upgrade FOS48TA observation camera instead of the backup-only (primarily due to the added range), the camera arrived via UPS yesterday.

My question is, what is the camera powered by (i.e., the power connector is (I assume) connected to SOME power source)? I've heard that some are powered by the trim lighting and some by a switched source such as reverse lights.

I'm sure that there are others who have asked this question, but couldn't find the correct keywords to answer my question.

Any help is greatly appreciated.
2017 Launch L3 24RLS
2016 Chevy Silverado High Country 1500 6.2L

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests