Bumper hitch

A place to discuss non-OEM upgrades and improvements
Post Reply
Marsh
Posts: 19
Joined: February 15th, 2021, 5:06 pm

Re: Bumper hitch

Post by Marsh » July 14th, 2021, 9:10 am

If anyone are looking for a bike hitch then read this guide. It will be helpful to purchase a best bike hitch for your RV.

001
Posts: 51
Joined: March 20th, 2016, 1:12 pm
Location: Central Florida

Re: Bumper hitch

Post by 001 » April 14th, 2016, 11:33 am

tslarson wrote:One more thing to add:
If there is any movement between the receiver and the bike rack insert, add a anti rattle device to remove that movement. I use the one linked below.
http://www.etrailer.com/Hitch-Accessori ... M-061.html

The bike rack came with one.

User avatar
tslarson
Posts: 69
Joined: January 20th, 2015, 1:13 am

Re: Bumper hitch

Post by tslarson » April 14th, 2016, 3:40 am

One more thing to add:
If there is any movement between the receiver and the bike rack insert, add a anti rattle device to remove that movement. I use the one linked below.
http://www.etrailer.com/Hitch-Accessori ... M-061.html
Image
2015 Travel Star Galaxy 299BHU (Black Pearl Edition)
2009 Ford F150 CC FX4

User avatar
jcarlilesiu
Posts: 342
Joined: January 6th, 2015, 8:23 pm
Location: Manteno, Illinois

Post by jcarlilesiu » April 14th, 2016, 2:13 am

Great advice tlarson. I have also seen some bolt on reinforcement plates that take the pressure off the welds.

Sent from my SM-G925V using Tapatalk

User avatar
tslarson
Posts: 69
Joined: January 20th, 2015, 1:13 am

Re: Bumper hitch

Post by tslarson » April 12th, 2016, 12:29 am

Lots of people will tell you this will flex the bumper and eventually cause the welds to crack. I used the same Curt receiver on my Jayco and it worked ok. I believe the Curt style receiver hitch puts less stress on the bumper than any of the other types available. Good choice. One thing I did is mount the receiver off center to the left, it would then allow me to see one of the bike tires in my rear view mirror, giving me peace of mind that they were still attached. It also moved the bumper flex point closer to one side, hopefully putting less stress on the welds. One thing to note is to try to eliminate the bike rack bounce, thereby reducing bumper flex. Also don't carry more than 2 bikes.
Image
2015 Travel Star Galaxy 299BHU (Black Pearl Edition)
2009 Ford F150 CC FX4

001
Posts: 51
Joined: March 20th, 2016, 1:12 pm
Location: Central Florida

Bumper hitch

Post by 001 » April 11th, 2016, 7:56 pm

Put a 2" receiver hitch on the bumper for my bike rack. I'd love to be able to double tow and pull my 16 foot jon boat at the same time, but that's frowned upon in Florida.

I put it upside down for ground clearance and the bikes are tucked up better.

Image


Image

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests